IQAir FlexVac

The IQAir FlexVac converts the IQAir stand-alone filtration units into a mobile self-contained extraction system that allows you to capture gases, fumes, vapours, odours and particulate contamination directly at their source.

The IQAir Mobile FlexVac is beneficial for a wide range of environments and requirements, such as:

  • Dental surgeries
  • Laboratories,
  • Hospitals
  • Nail Salons
  • Cleanrooms
  • Electronics
  • Construction
  • Manufacturing

Reach and Manoeuvrability

The IQAir FlexVac kit features a self-supporting suction duct that gives the FlexVac a horizontal reach of up to 1.7m and a vertical reach of up to 1.9m.
The FlexVac sits on six casters, and the 130mm diameter suction duct can be bent, twisted and turned into virtually any position and remains in place until repositioned.

Stability and Suction Power

The IQAir FlexVac suction duct is made of interlocked polypropylene which makes the duct stiff enough to be self-supporting and flexible enough to allow for convenient positioning.
The IQAir FlexVac has exceptional direct source capture power for a system of its size and reach.  At a typical air flow of 150 cfm the air velocity in the suction duct is approx. 17 ft/s or 12 mph.

Application

The IQAir FlexVac is an ideal source capture unit for use in:
• Dental Practices
• Laser Surgery Clinics
• Electronics Manufacturing
• Laboratories
• Beauty Salons

Installation

The self-contained design of the IQAir extraction system requires no venting or ducting to the outside. This makes the system completely mobile, saves energy and expensive building conversion work.  Assembly of the FlexVac kit is straightforward and all required tools are supplied.

IQAir InFlow Compatibility

Compatible with all IQAir filtration devices.  Not compatible with the accessories PF40, VMF, VM FlexVac, VM InFlow and FlexVac.

The IQAir FlexVac kit features a self-supporting suction duct that gives the FlexVac a horizontal reach of up to 1.7m and a vertical reach of up to 1.9m. The FlexVac sits on six casters, and the 130mm diameter suction duct can be bent, twisted and turned into virtually any position and remains in place until repositioned.

Reach and Manoeuvrability

The IQAir FlexVac kit features a self-supporting suction duct that gives the FlexVac a horizontal reach of up to 1.7m and a vertical reach of up to 1.9m.
The FlexVac sits on six casters, and the 130mm diameter suction duct can be bent, twisted and turned into virtually any position and remains in place until repositioned.

Stability and Suction Power

The IQAir FlexVac suction duct is made of interlocked polypropylene which makes the duct stiff enough to be self-supporting and flexible enough to allow for convenient positioning.
The IQAir FlexVac has exceptional direct source capture power for a system of its size and reach.  At a typical air flow of 150 cfm the air velocity in the suction duct is approx. 17 ft/s or 12 mph.

Application

The IQAir FlexVac is an ideal source capture unit for use in:
• Dental Practices
• Laser Surgery Clinics
• Electronics Manufacturing
• Laboratories
• Beauty Salons

Installation

The self-contained design of the IQAir extraction system requires no venting or ducting to the outside. This makes the system completely mobile, saves energy and expensive building conversion work.  Assembly of the FlexVac kit is straightforward and all required tools are supplied.

IQAir InFlow Compatibility

Compatible with all IQAir filtration devices.  Not compatible with the accessories PF40, VMF, VM FlexVac, VM InFlow and FlexVac.

The IQAir FlexVac kit features a self-supporting suction duct that gives the FlexVac a horizontal reach of up to 1.7m and a vertical reach of up to 1.9m. The FlexVac sits on six casters, and the 130mm diameter suction duct can be bent, twisted and turned into virtually any position and remains in place until repositioned.